Flood Profile Options Pane

The Flood Profile Options pane enables you to analyze your exposure data for the values listed in the following table. The FEMA (Federal Emergency Management Agency) options apply to the hazard maps used with the FEMA Flood model; the AIR options apply to the hazard maps used with the AIR Inland Flood Model for the United States. For information about the AIR Inland Flood Model, refer to the Using the AIR US Flood Model in Touchstone guide. Click here for a comparison of AIR Flood Hazard maps and FEMA maps.

This pane includes pane-specific parameters, parameters specific to the Hazard AnalysisTemplate, and parameters common to all objects. To include this hazard in the template, select the Flood check box.

Pane-specific parameters: Return Values

Description

Flag Values

FEMA - Distance to Water Body

The distance from the location to the closest FEMA-defined water body, which includes oceans, very large lakes, and very large rivers. More...

To flag certain distance conditions, enter low and high distance ranges; be sure to specify units (feet/miles).

FEMA - Distance to 100-Year Flood Plain

The distance from the location's boundary to the flood plain. More...

To flag certain distance conditions, enter low and high distance ranges; be sure to specify units (feet/miles).

FEMA - Distance to 500-Year Flood Plain

The distance from the location's boundary to the flood plain. More...

To flag certain distance conditions, enter low and high distance ranges; be sure to specify units (feet/miles).

FEMA - Flood Source

The source or sources of the flood data: Q3Firm or DFIRM.

To flag flood sources, select one or more items in the selection list.

FEMA - Flood Zone Category

FEMA flood zone categories that apply to the location.

To flag one or more FEMA flood zone categories, select one or more items in the selection list.

FEMA Flood Zone

Indicates which FEMA flood zone the location is in.

To flag one or more flood zones, select one or more items in the selection list.

FEMA - Base Flood Elevation (BFE)

The elevation of surface water resulting from a flood that has a 1% chance of equaling or exceeding that level in any given year. More...

To flag base flood elevation categories, select one or more items in the selection list.

AIR - Distance to 100 year Flood Plain

The distance, in miles or feet, from the location's boundary to the 100 year flood plain. More...

To flag certain distance conditions, enter low and high distance ranges; be sure to specify units (feet/miles).

AIR - Distance to 500 year Flood Plain

The distance, in miles or feet, from the location's boundary to the 500 year flood plain. More...

To flag certain distance conditions, enter low and high distance ranges; be sure to specify units (feet/miles).

AIR - Flood Zone Category

Indicates location of the AIR flood zone.

More...

To flag one or more AIR flood zone categories, select one or more items in the selection list.

Elevation

The elevation of the location, as measured from mean sea level. More...

To flag one or more elevations, select one or more items in the selection list.

  The values in the user interface are rounded to two decimal places. In the database, however, the values are stored to five decimal places. Therefore, a rounding error may cause a discrepancy in the flagged results, which are based on the values stored in the database. For example, if you choose to flag Distance to the Nearest Fault values between 1.00 and 60.00, a value of 0.99987 would not be flagged, nor would a value of 60.00123, even though the user interface would display these as 1.00 and 60.00.

 

 


© 2020 AIR Worldwide. All rights reserved.

Touchstone 7.0 Updated September 03, 2020